What is perforated metal?
Perforated metal is made from sheets of stainless steel, aluminium, mild steel or galvanised mild steel. The sheets need to be flat and thin enough to be cut and perforated easily. The application of the final product will determine the type and size of the pattern that’s perforated into the metal sheet.
The larger and more numerous the perforations, the less strength is left in the sheets. So applications where strength is a priority require smaller and fewer perforations. These requirements help you decide on the pattern for the perforations which can be round, square, slotted, decorative, hexagon or custom designed.
Round perforations: These perforations can be made in straight
lines so they are parallel and perpendicular to each other. They can
also be staggered so they are out of alignment. Round perforations
are very popular and a traditional pattern that’s used extensively
across industries.
Square perforations: These are a more modern and up-to-date
pattern that provides a design with more open space than round
perforations. They can also be in a linear or staggered pattern.
Slotted perforations: These are oblong or tablet shaped
perforations that can be linear or staggered. Slotted designs are
extremely strong and allow more air, light and noise to pass through
than round or square perforations.
Decorative perforations: These tend to be more aesthetic than
functional and are very popular with architects and interior
designers. We have a wide variety of popular decorative design
templates that can be cut to fit your application.
Hexagon perforations: These perforations have the highest
amount of open space and allow the greatest amount of air, light
and noise through the mesh. They are used almost exclusively by
architects and interior designers, because their application is
aesthetic rather than functional.
The sheet metal used at Metal Mesh to create all of these perforations is premium quality sourced from Europe and results in a burr free final product. In addition, we can provide your perforated metal in flat sheets, rolls, strips or any other shape that suits your requirements.
What are the different types of perforated metal mesh?
At Metal Mesh we provide six different types of perforated Metal, which should cover all your construction and design needs. All are available in 2000 x 1000mm or 2500 x 1250mm flat sheets and you can select from thousands of stock patterns available in our factory, as well as custom designs.
Perforated Aluminium is commonly used in interior fit outs, air vents, running boards, lighting, water treatment applications, partition walls, railings and much more.
Perforated Mild Steel is commonly used in screens, shelving, racks, washer plates, air vents and so on. It’s easy to cut and is stronger than aluminium.
Perforated Stainless Steel is used where strength is a priority, for example in safety flooring or decks. Heavier than its aluminium equivalent, perforated mild steel is also stronger, as well as rust resistant.
Perforated & Decorative options are available in mild steel, aluminium or anodised aluminium. Commonly used in architectural and interior design applications.
Perforated Galvanised Mild Steel is used for the same applications as mild steel except that it’s given a protective coat of zinc prior to perforation. Commonly used in landscaping, architectural designs, outdoor security fencing, exterior furniture or anywhere a mix of strength and decoration is required.
Perforated Processing Screens are made from stainless steel. Commonly used in agriculture as grain cleaning and drying screens, malting floor screens, rice sorting
Post time: Nov-11-2023